Polyether amine solves the influence of water content on field spraying construction

2020-07-13 10:09:43

Polyether amine technology is mainly through a series of technology to produce the products we need, so what are the characteristics of the products produced? I hope you can deepen the understanding of polyether amine in the following introduction.

(1) Fast curing, good adhesion to all kinds of substrates.

(2) Polyether amine technology does not contain solvents and fillers, which meets the requirements of environmental protection.

(3) It has excellent physical and chemical properties and wide adjustable range.

(4) good resistance to chemicals, anti-aging, and can be used in bad conditions for a long time.

(5) Polyether amine technology uses a unique water removal technology to solve the impact of water on the field spraying construction.

Concrete cracks, no matter they are micro cracks smaller than 0.1 mm or wider cracks larger than 5 mm, will bring damage to the service life, waterproof and anti-corrosion of concrete building layout. Permanent or severe cracks will bring unpredictable damage to the safety of buildings. We have to know that polyether amine has to be produced through strong adhesion technology.

Concrete crack is a common defect of cement concrete layout, the common cement products will exist, and chemical protection is required. If the cracks are severe, they need to be repaired.

Concrete crack is a defect that always adhere to the dynamic. Under the influence of various factors, such as internal stress, shortening, releasing gas, external climate, corrosive gas and impact of external force, the concrete cracks have been shortening and expanding, adhering to the change of continuous expansion. However, no matter how it changes, the general trend must be constantly expanding, because the concrete has no self repairing ability, it will only increase the defect of cracking.

As a curing agent with elastic function, polyether amine can make epoxy cured products have abundant tensile elongation and tensile strength. If planned and manufactured properly, polyether amine technology can fully meet the functional requirements of low viscosity, good penetration function, strong adhesion, high tensile elongation and tensile strength.