Silicone structural adhesives can be used in a wide range of climatic conditions

2020-05-20 09:13:33

The removal of silicone structural adhesive should be different from that of edible and non edible utensils. A good way is to remove it by physical methods. Use steel wire balls, knives and water sandpaper. For thick and much local areas, use a knife to scrape, then use steel wire balls to scrape, and finally use sandpaper to polish. Pay attention to avoid that the utensils that are crossed should be careful to prevent the glass glue from falling off, The removal of all-purpose glue stains, clothes infected with all-purpose glue stains, can use acetone or banana water drop on the glue stains, to use a brush to repeatedly wash, after the glue stains become soft and take off from the fabric, then rinse with water. If it can't be done at one time, it can be rinsed several times and finally cleaned. Do not use this method for fabrics containing acetate to prevent damage to the fabric.

When decorating, the silicone glass glue was accidentally applied to the cotton pants. A good way is to find a nail washing water that can gradually dissolve the glue, but be careful to fade. It is more common and safer to use the essential balm.

Acid silicone glass adhesive is a kind of one component acid curing sealant, which is easy to use, fast surface drying, no sagging, has good elasticity and adhesive performance, can be used in a wide range of climatic conditions, and has weather resistance and strong resistance to UV, snow, air pollution and other natural erosion. It is used for bonding glass, aluminum, PVC granite and most plastic products, It has good sealing effect. It can be used for sealing and leak proof between metal and plastic, aluminum alloy doors and windows, storefront window, skylight, plastic and glass, But it can not be used in structural glass assembly. It can improve the fluidity and demoulding of plastic processing, reduce the torque, reduce the wear of equipment, fill the mold capacity, and reduce the defective rate of products. It can significantly reduce the friction coefficient, improve the smoothness, improve the surface luster, enhance the silk touch on the surface, and improve the scratch resistance. It can also improve the flame retardancy, reduce the smoke density, and improve the impact strength and It has good stability and non mobility.

1. Joint sealing among metal, glass, aluminum, ceramic tile, plexiglass and coated glass;

2. Joint sealing of concrete, cement, masonry, rock, marble, steel, wood, anodized aluminum and painted aluminum surfaces. Primer is not required in most cases.

3. It is suitable for weather proof sealing of various curtain walls, especially for glass curtain walls, aluminum-plastic panel curtain walls and stone dry hanging.